Acroprint ATR240 Bedienungsanleitung PDF herunterladen (Seite 12)

Re-setting Time Recorder to Factory Defaults

The "All-Reset" button on the internal control panel resets Time Recorder settings

such as date, time, print/display formats, to the factory defaults. See chart for factory

defaults. Note: The button is recessed to prevent accidentally resetting the Time

Recorder settings. Use the point of a pen or paperclip to access the button. It will

take approximately 9 seconds to complete the reset.

Troubleshooting

Symptom Possible Problem Solution

Clock does

not power on

Power Outage

The power source was not properly

connected

Check circuit breaker. Wait for power to be

restored

Check the connections of the power supply

and/or backup battery

The time is

incorrect

The time was not set correctly.

Prolonged power outage.

Set correct time

Set time after power is restored

The clock

keeps losing

time

The coin cell battery on the

motherboard needs to be replaced.

Replace the coin cell on the motherboard.

Display Off,

Clock has

Power

Defective Motherboard

Defective LCD display

Contact Local Dealer or Acroprint for repair

The date is

incorrect

The date was not set correctly

Set correct date

Clock beeps

and rejects

time card

Wrong side of card is inserted

(monthly card)

Incompatible time card

Flip card over and re-insert

Use card approved for the ATR240

Print too light

Ribbon cassette not properly seated.

The print ribbon is dried out

Remove and re-insert ribbon cassette

correctly

Replace ribbon cassette

Punches print

in wrong

column

Wrong column selected (manually

selected) or column change time set

incorrectly.

Select the correct column (P1 – P6) or set the

correct column change time

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Acroprint ATR240 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wanduhren Acroprint ATR240