Acroprint ATR360 Bedienungsanleitung

ATR360 User Manual Top Loading Time RecorderWith Fingerprint & Proximity Badge User Verifi

6 Setting Start and End of DST 27. The mode indicator “08” will be flashing, press P5 to switch to mode “09” 28. The mode indicator “09” will be flash

7 Fingerprint Settings Table A list of the fingerprint settings is shown below: Setting Description Add.U Add User: Add Fingerprint an

8 Correct Finger Positioning on the Sensor Place finger flat on the sensor surface Place finger in the center of the sensor surface Inco

9 Add User 5. Press enter a. Users must be assigned a number user number. You may add up to 150 users and 5 administrators 6. To assign the user a

10 Important! Setting the Real-Time Clock (RTC) A Real-time Clock (RTC) is a computer clock (usually on a chip) that keeps track of the current time

11 Editing Shift Intervals 1. Open clock lid. Press "FP Setup" button 2. Press "down" until the LED display shows "I

12 Set Column Change Time Setup 1. Remove top cover 2. Locate the program switch to the left of the finger print reader. Move the switch to the down

13 Using the Time Clock Using the Time Card to Clock In 1. When clocking in P1, P3 or P5 must be selected 2. Insert the time card with the current

14 Features and Specifications Clock Features User Authentication Method Fingerprint or Proximity Badge Display Language English Operation Mode St

15 Miscellaneous Input Voltage DC 18v Input Current 1.5A Anti-static Strength < 15KV Operational Relative Humidity 10 – 60% Operational Tempera

Lithium Battery Caution: The circuit board on this terminal is populated with a lithium battery to protect data or programs stored in the Random Acc

16 Battery Pack Specs: Voltage: DC 14.4v Capacity: 1800mA Standby mode: 30-36hr reserve power Fully charged: 5 days use (300 punches/day) Note: Actu

17 Fingerprint Reading Issues Problem Correction How to select finger? Use the index or middle finger to enroll; try the left hand fingers if the r

18 Troubleshooting Symptom Possible Problem Solution Clock does not power on Power Outage The power source was

19 Symptom Possible Problem Solution The clock keeps losing time The coin cell battery on the motherboard needs

20 Frequently Asked Questions 1. Q: Why can’t the clock verify my fingerprint? A: Possible Causes: The following conditions could result in a fail

21 14. Q: Why is my clock printing on the wrong row? A: - Make sure the date is set correctly. - Make sure the “End of Day” time is set correctly

22 Replacing the Circuit Board Batteries The ATR360 is equipped with (2) CR2032 3v Lithium Coin Cell batteries: one battery is on the Main board and t

23 Installing the Operational Battery Pack First unplug the clock. The door to the battery pack compartment is located on the bottom edge of the ba

24 Cleaning the ATR360 Do not use cleaning products that contain alcohol or other strong chemicals as they could discolor or crack the terminal hous

25 In order to use a bell or horn a relay is required. Please call Acroprint or your Dealer to order the relay (PN 01-0230-000). When a signal

Table of Contents Before You Start!...1 What’s In the Box...

26 Supplies, Parts & Accessories Part# Description 01-0230-000 24 Volt Switching Relay Kit 01-0270-000 ATR360 Biometric/Proximity Time

27 Acroprint® Limited Warranty Should you have any questions concerning your warranty information or supplies, please contact the dealer or store wh

28 Product Registration Card Model No._______________________ Serial No._____________________________ First Name____

User Notes

06-0400-000 Rev. F

Using the Time Clock...13 Using the Time Card to Clock In ...

1 Before You Start! What’s In the Box • ATR360 Time Recorder • (2) Clock Cover Keys • 18vDC Switching Power Supply • User Manual • (25) Sample ATR2

2 Time Recorder Mode Settings Mode Setting Values Default Value 01 Year 2000 – 2099 Year of Mfg 02 Date 1-12 Mo, 1-31 Date 01, 01 03 Time

3 Clock Overview Top View Front View • Battery Status Indicator: A fully charged Battery will have (5) bars.

4 Rear View

5 Initial Setup Setting Year 1. Remove top cover a. Locate buttons at the top of the clock labeled P4, P5 and P6 i. P4 changes values down ii. P5